NOVALINK® FP

NovaLink™ FP: High-Quality Moisture Curing Elastomeric Waterproofing Sealant

TDS  SDS

NovaLink™ FP is a premium moisture-curing elastomeric sealant designed to fill, seal, and level grout lines, voids, seams, and surface damage on construction materials before applying liquid waterproofing. It is also ideal for repairing roof leaks, asphalt shingles, roof valleys, seams, chimney flashings, and emergency roof repairs.

Basic Uses

• Above Grade Waterproofing
• Below Grade Waterproofing
• Roof Repairs
• Sealing Parapets
• Lining Gutters and Valleys
• Planter Boxes
• Lining HVAC Condensation Pans

Test and evaluate to ensure adequate adhesion.

Features & Benefits

• Solvent-Free: Will not shrink.
• No Outgassing: Bonds to damp surfaces without bubbling.
• Versatile Use: Effective for both temporary and permanent repairs.
• Quick Skin Over: Skins over in 60 minutes.
• Excellent Adhesion: Bonds well to damp concrete.

Regulatory Compliance

• Conforms to OTC Rule for Sealants
• Meets California Regs: CARB and SCAQMD
• Free from cancer-causing chemicals listed in California Proposition 65
• Conforms to USDA Requirements for Non-food Contact

Green Standards

• LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) - 1 Point
• NAHB Model Green Home Building Guidelines: 5 Global Impact Points
• VOC Content: Less than 42 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F / 115°C)

Typical Physical Properties

• Viscosity: 1,000,000 cp +/- 200,000 cp (Brookfield RVF, TF Spindle, 4 RPM, 73°F)
• Density: 12.9 lbs per gallon
• Hardness (Shore A): 30
• Elongation at Break: 350%
• Shear Strength: 140 psi
• Tensile Strength: 125 psi
• Low Temp Flex: Pass -10°F (-23°C) (1/4 inch mandrel)
• Tack Free Time: 60 min +/- 15
• Shrinkage: No visible shrinkage after 14 days
• Service Temperature: -40°F to 200°F (-40°C to 93°C)

Compatible Substrates*

• Concrete
• Steel
• Block and Brick
• Aluminum
• Stone
• Galvanized Metal
• Masonry
• Isoboard
• Plywood and OSB
• Untreated Wood
• EPS (Expanded Polystyrene)
• FRP (Fibre Reinforced Plastic)

Packaging

Available in:

• 10.1 oz Cartridges: 24 cartridges/carton, 45 cartons/pallet

Emergency Repair Instructions

1. Remove all standing water and clean the substrate.
2. Ensure temperatures are above 35°F (2°C) and rising.
3. Cut the nozzle and puncture the inner seal to apply the material.
4. Firmly trowel material, extending the patch at least 4” past the repair area.
5. Consider this a temporary repair until conditions allow for a permanent fix.

Color

• Black